Projects

The problem: The existing roof had reached the end of its useful life and needed to be replaced completely. The project required removing the old roof covering entirely before the new roof could be installed.

The solution: Total Service Contracting tore off the old roof down to the deck and installed a complete new roof system from start to finish. The job was carried through in one continuous sequence, leaving a clean, finished, weathertight roof.

The problem: The flat roof was worn and in need of restoration rather than a full replacement. The client chose a silicone recovery system to restore and extend the life of the existing roof.

The solution: The crew prepared the flat roof surface and applied the silicone recovery system coating. The result is a restored, uniform roof surface with renewed waterproofing, completed without tearing off the existing roof.

The problem: The building's original roof was an aging painted metal panel roof. Close-up views showed torn, curling material and heavy rust staining along the ridge, with leaf debris built up in the panel grooves. The plain fascia had no matching gutter system in place.

The solution: TSC removed the deteriorated roof panels and installed a new red standing-seam metal roof, including two new ridge vents for attic airflow. A matching red-trimmed fascia and gutter system was installed along the full roofline.