Re-roof and New Gutter Installation — Deltona Roofing

The building's original roof was an aging painted metal panel roof. Close-up views showed torn, curling material and heavy rust staining along the ridge, with leaf debris built up in the panel grooves. The plain fascia had no matching gutter system in place.

TSC removed the deteriorated roof panels and installed a new red standing-seam metal roof, including two new ridge vents for attic airflow. A matching red-trimmed fascia and gutter system was installed along the full roofline.

Wide view of the building after the re-roof, with a new red roofline edge and matching red gutter trim. — BeforeAfter

Wide view of the building before the re-roof, with the original plain cream fascia and no matching gutter trim. — BeforeAfter

New red standing-seam metal roof with two new ridge vents installed for attic airflow. — BeforeAfter

Close-up of the old roof panels, showing torn, curling material along the seams. — BeforeAfter

New red metal roof panels installed cleanly along the ridge, replacing the old rusted panels. — BeforeAfter

Ridge line of the old painted metal roof, with rust staining and leaf debris built up in the panel grooves. — BeforeAfter

Finished red metal roof section after installation. — BeforeAfter

Another section of the old roof before replacement, showing worn, faded panels. — BeforeAfter

Re-roof after photo: completed roof replacement with the new roof surface installed, view 1 of 4

Re-roof before photo: the original roof surface as it appeared before the tear-off began

Re-Roof: Tear-Off to Finish

Service: Roofing

Silicone recovery system roof after photo: the flat roof finished with the new silicone coating, view 1 of 2

Silicone recovery system roof before photo: the existing flat roof surface as it appeared before the coating work

Silicone Recovery System Flat Roof

Service: Roofing